How to set IP PTZ Cameras about 10x/20x/30x zoom ?

ToubleShooting：
1. Please ensure that the PC and camera used for live streaming are in the samenetwork segment;
for example, the IP address of the device is 192.168.1.205, and the IP address ofthe PC can be
changed to 192.168.1.200;
2. Make sure that the IP address set by the PC can access the external network;
3. The factory default IP address of the device is 192.168.1.205. If the network segment of thePC
(with access to the external network) and the device are not in the same network segment, the
following adjustments need to be made:

After that, you can access the built-in Webserver of the device through abrowser, and then you
can change the IP address of the device to the network segment of the current network.
After setting the IP address of PC, please remember to change back to the following settings:

1. LogIn
Please input the IP address (defaulted IP address is 192.168.1.205 ) through Internet
Explorer, then you can visit the video image of our IP camera via web.
Enter thepage of login interface, you can select Language (Chinese or English), input
admin and password tologin as following: (Default admin: admin, Default password:
empty)

a. Click the login button then you can enter the web page
b. If you are the first visit, you will be prompted to install the VideoClientControl plugin, as
shown below：

Please click the downloadbutton.

After running, the browser will restart.
2. Live Preview
After the plugin is installed, please input the IP address of the device again to preview the image,
asbelow:

Select WebVideoPlayer at the web player, whichjust support 2 kinds ofvideostreaming preview
currently:
a. High Definition;
b. Standard Definition;
3. Parameter Setting

4. Firmware Upgrade

Browse for a specific fileand perform an upgrade until the upgrade iscompleted
5. Account Setting

6. RTMP Setting
The introduction of Huya Live (Its overseas versionis NimoTV, which is marketed in SoutheastAsia
) for live streaming:

a. Downloadand install the Huya client. After the registration is finished, please choose to
start the live streaming; then choose a third-party push stream, and the relevant address
will be generated accordingly.

b. Set the address generated fromabove to the device as follows:

Notice: The dynamic push streaming needs to be disabled
c. After the link setting is successful, the Huya client will pop up the following window:

Notice: At present, only the huyalivestreaming platform has been tested, and other platforms will be
continuously updated in the future.
7. Youtube：