How To Remotely Control The Video Conference Camera?
Jul 28, 2018
How to remotely control the video conference camera?
Remote video conferencing requires remote control of the camera up, down, left and right and zoom, so how to control it? What do we need to do?
At present, the control of the video conference camera is divided into two ways, that is, control by two protocols, one is RS232, the other is 485, which is the wiring mode, and then the protocol is selected in the video conference. Then let's talk about how to operate,
Let's talk about 232. If the computer has a 232 serial port control interface, it can be connected directly through the serial port control cable. If not, use a 232-to-USB adapter to convert the control signal into a USB signal.
485 general computer can not directly connect to 485, the same is to convert to USB signal through 485 to USB, and then directly connect to the computer.
After connecting the control line, we enter the pan/tilt setting of the video conferencing software to set the pan/tilt of the video conferencing camera. First, we need to select the protocol supported by the camera, such as PECOL-D, PECOL-P, VISCA. Several are the current general control protocols, and then choose the address code, baud rate, so that we can control the video conference camera up and down, left and right, zoom.
