Sharing How To Solving Network Camera Problem

Sharing How To Solving Network Camera Problem 

With the advent of the Internet era, network cameras have become the main force of surveillance cameras. Following the many network monitoring problems, the lack of basic knowledge has made many customers seem to be stretched. Here to share some common problems with network cameras to solve everyone's urgent needs.

1 When the network camera appears intermittent?

Solution 1: Check whether the network environment is good and check whether the network cable end of the network camera is loose or not.

Solution 2: Check if the IP conflicts.

Solution 3: Check if the device is powered properly.

Solution 4: Check if the device upgrades the wrong program.

2 Network upgrade failed?

Solution 1: Log in again to see if the upgrade was successful. Sometimes the network environment causes the progress bar not to provide timely feedback.

Solution 2: Check whether the network environment is normal and whether it is disconnected or powered off during the upgrade.

Solution 3: Check if the program and device match.

Solution 4: You can re-upgrade through the 3800 port of the config tool (3800 requires a matching program to be upgraded).

3 After the network camera is upgraded, it can ping but cannot log in.

Possible reason: Check whether the WEB port has been modified.

Solution 1: Reset the device and log in again.

Solution 2: You can re-upgrade via the 3800 port of the config tool (3800 requires upgrading the matching program)