Solutions To Common Problems In Video Conferencing System Debugging

Solutions to common problems in video conferencing system debugging

1. The enclosure of the equipment is electrified.

Because all equipment in sound engineering must use electricity, the problem of some equipment shell being charged may be encountered in debugging. Although the shell being charged does not necessarily affect the use of equipment, it will endanger the safety of users and must be solved thoroughly.

2. The volume of the sound system is not enough.

When the project is debugged, the volume of the sound is always smaller, and the sound pressure level requirement is not reached.

This indicates that there are problems in installation and installation of video conference equipment.

3. Resonances and feedback in the sound field.

Although the design and construction have been carefully considered, but inevitably there are not too comprehensive and unpredictable, and this problem certainly affects the normal use of people, should be eliminated.

4. Generate interference noise.

Sound engineering encountered a lot of interference noise time, the causes are also different, usually very troublesome to solve, but as long as careful analysis, from the construction of the system to find the reasons, step by step analysis, the problem can always be solved.

5. video images are not normal.

Professional audio engineering video transmission distance is generally relatively long, usually the signal also needs to be processed and distributed video, and then to a number of display devices, the middle of the link is also more, may be due to different reasons resulting in poor video image quality, affecting the viewing effect, so it should be processed. [video conferencing system]

6. The voice of wireless microphone is unstable.

Nowadays most sound engineering is equipped with wireless microphones, but due to improper installation and commissioning, a considerable number of poor use.